Hydraulic tube puller Type TPS 55

benefits

  • Largest application area: tube ID 5.5 - 78.5 mm

  • Ideal power transmission by screwing the extraction tool into the object to be pulled tube

  • hydraulic power unit

    • Motor: 400 V / 3~ / 50 Hz / 2.2 kW

    • Pump delivery rate: 4.5 l/min (50 bar) | 1.9 l/min (700 bar)

    • Working pressure: max. 700 bar

    • Tank capacity: approx. 20 l

    • Hydraulic hoses: 6 m

    • Weight incl. hoses: 70 kg

    Pipe pull-out cylinder

    • tube ID: 5.5 - 78.5 mm

    • tube wall thickness: ≥ 2.0 mm

    • Tractive force: 30 t

    • Stroke of pull cylinder: 150 mm

    • Number of hydraulic connections: 2 connections

    • Dimensions (without tool): L = 230 mm

    • Weight: approx. 23 kg

    Technical data subject to change without notice

  • The hydraulic tube puller type TPS 55 is used to remove thick-walled tubes from tube floors. The device consists of a transportable hydraulic unit, a hollow piston pulling cylinder with a mechanical quick-release clamping device and an extraction tool consisting of an extraction spindle, spacer sleeve and clamping jaws. The extraction spindle is screwed into the end of the pipe to be extracted using a drive machine . The pulling cylinder is then placed on the pull-out spindle and both are fixed in place using a quick-release chuck. The pressurized cylinder then pulls the tube out of the tube sheet.

Make a request now